Month: July 2019

Cleaning large commercial environments can be challenging. This is why it is often wise to leverage the efficiency of industrial floor sweepers. These units have been specifically engineered to withstand a considerable amount of abuse, so they are highly reliable.

However, it is the responsibility of the operator to ensure that the correct methods and safety protocols are in place at all times. What do the professionals have to say?

Let us look at a handful of operational guidelines so that you will be able to make the most out of what these modern marvels have to offer.

Operating the Machine

Although modern floor scrubbers have been designed with an extremely user-friendly configuration in mind, we still need to remember that these are very powerful units. Serious injuries can, therefore, occur if they are used in an incorrect manner. Always be sure that the area to be cleaned is free from any workers or pedestrians.

If you are working within a public location, place warning cones around the periphery. Be sure to pay attention to what is to the rear of the unit when baking up or when making turns.

It is likewise prudent to have a cleaning pattern in place in order to maximise the efficiency of the floor scrubbing machine. This will save time and money while reducing the chances of an accident.

Operational Mistakes to Avoid

Do not use the machine near flammable liquids or gases, as the majority of devices are not equipped with explosion-proof motors. Never travel fast along inclines or slippery surfaces, as the unit may begin to lose traction.

Do not turn at full speed; the machine may lose its balance. Finally, do not allow other passengers to ride on the unit unless it has been designed to accommodate such a situation.

Cleanhire supplies a wide range of floor scrubbers which are perfectly suited for large commercial environments. Please examine our website in greater detail so that this collection can be fully appreciated.

Modern floor cleaning machines are able to accommodate even the largest of environments. Some units are even capable of handling spaces of more than 12,000 square metres. This is due in no small part to the sheer durability of these vehicles as well as their cleaning power.

However, you will often need to utilise chemicals in order to sufficiently remove dirt and debris from a surface. Many of these chemicals are actually quite dangerous and they need to be handled with a dedicated level of caution.

Let us look at some of the hazards attributed to these chemicals in order to appreciate why safety is no laughing matter.

The Risk of Burns

Many floor cleaning solutions are known for their high levels of alkalinity. Although this is an excellent attribute when tackling tough stains or ground-in dirt, such a formulation is quite dangerous to humans. Highly alkaline fluids can easily cause burns to the skin if handled improperly. This is why only qualified individuals should deal with cleaning solutions; particularly when filling a floor cleaning machine or removing its contents.

Dangers to the Eyes, Nose and Throat

The eyes, nose and throat are also at risk. If the solution happens to splash and make contact with one of these areas, burns and even blindness can occur as a result. This is why users should make it a point to wear the proper personal protective equipment (PPE). Examples include:

• Industrial-strength rubber gloves
• Goggles
• A mask that is fastened over the nose and mouth

The Issue of Proper Ventilation

Floor cleaning solutions are also known for their proclivity to emit noxious fumes. These fumes will easily irritate the respiratory system and those with underlying conditions (such as asthma) are at a higher risk of developing complications. Always use floor cleaning solutions within a well-ventilated environment in order to reduce the chances of an accident or an unintentional injury.

Safely handling scrubber dryers and their associated chemicals requires a good deal of experience and common sense. This is why the proper training should be made available to all relevant personnel.

Industrial vacuum cleaners are extremely complicated machines and they are often required to tackle challenging tasks with a commercial environment. Although these units are maintained to the highest of standards, faults and similar problems can and will occur.

Spotting the first signs of trouble will help to prevent more costly repairs and downtime, so it is important to quickly list some mechanical situations which require the help of a trained professional such as an industrial hoover hire technician.

A Lack of Suction

If you note that the unit has begun to shows signs of low suction (or if it has ceased entirely), the chances are high that this is due to a clogged air filter. Remove the filter and check for any debris. It could also be necessary to replace the filter entirely.

A Broken Internal Belt

Drive belts are under a great deal of pressure and these are the mechanisms which allow the scrubbing brushes to rotate. It therefore makes sense that a belt could snap on occasion. Symptoms may include the smell of burning rubber or a scrubbing head that has suddenly stopped rotating.

Scrubbing Brushes that Fail to Spin

Although a broken belt can cause this problem, the brushes themselves may also have become jammed. After the unit is powered down, examine these heads and make sure that no debris (such as hair or twine) is impeding their motion. Briefly scrutinise the brush roll assembly to ensure that no bearings have become lost or damaged.

A Weak or Inoperative Motor

There are several reasons behind this situation. The electronic control board (known as the PCB) may have become damaged. The mains fuse may have tripped due to a perceived overload. Broken drive or cog belts can also cause an engine to cease. Any of these scenarios should be diagnosed by a trained professional.

The experienced floor cleaner machine suppliers at Cleanhire are more than capable of assisting if you find that your unit is failing to function properly. Please contact us to schedule a consultation.

Cleaning large commercial centres can represent a very challenging task due to the sheer size of these properties. Owners are often forced to choose between cost and efficiency. Unfortunately, this will inevitably lead to maintenance issues and the safety of patrons can even be placed in jeopardy.

This is also why traditional methods are often not able to provide sufficient results. If you have been struggling to find a cost-effective solution, hiring a floor scrubber should be seriously considered. What are the benefits of these ride-on units and how can such advanced technology tackle even the most daunting of tasks?

Specifically Designed for Large Spaces

Modern automated floor scrubbers have been engineered to handle demanding workloads. In fact, were you aware that some units have the capability of cleaning more than 12,000 square metres? In other words, they are ideal for addressing the needs of shopping centre floors with ease.

The fact that the user can ride on the machine itself signifies that he or she is able to enjoy a greater degree of control; an obvious concern when navigating around objects or patrons. Many units also contain large internal storage tanks; important in regards to ensuring continuous operation.

Heavy-Duty Cleaning Solutions

Commercial floor scrubbers have been built to last and they are extremely durable. If maintained properly, you can expect a second-to-none sense of reliability when dealing with the needs of your commercial centre. In the same respect, cleaning mechanisms such as brushes and squeegees have been engineered for heavy-duty uses.

This allows them to represent the perfect solutions when dealing with high-traffic areas that might be associated with spills and stains. However, these floor scrubbers are also extremely flexible in terms of the sizes and dimensions to choose from.

You will, therefore, be able to find the right make and model for your unique requirements.

If you would like to learn more about the benefits of renting such units, please contact Cleanhire and speak with a trained representative.